Experts' Comments

Comply Foam Tips and the Effects of Tip Selection


The Trouble with Tips
Numerous people have asked me to investigate how ear tips affect the frequency response of in-ear monitors (IEMs). Personally, I've not experienced much change in tone when changing from one tip type to another, but I've had plenty of troubles with ear tips in general.

My left ear has a significantly more acute bend in it's ear canal than my right ear. Many times the ear tip bottoms out at the bend and the opening of the ear tip gets pushed against the wall of the canal occluding the opening and muffling the sound. Deep seating IEMs--like the Etymotic ER4P--often will put terrible pressure on the ear canal as it tries to straighten it out, which can be quite uncomfortable. Even custom molded in-ear monitors can be quite difficult to get into my left ear. What I've learned is that getting a comfortable and quality seal in my ears can be quite difficult. I've also learned that with care and experimentation most of these problems can be overcome.

The biggest problem, it seems to me, is that most IEMs come with a limited selection of tips--usually just small, medium, and large round silicon tips. Sometimes one will work, and sometimes not. Fortunately, I've got a pretty big selection of tips lying about and I can usually find one that works. But for most folks, that's not really an option. Enter Comply.

Started in 1990 by Dr. Robert Oliveira, Comply is a spin-off from work done at 3M. Dr. Oliveira is a specialist in the human hearing system and has done significant research in the changing shape of the ear canal with mouth movement. He came to the conclusion that dynamic memory foam is an ideal material for ear tips. At this point, Comply has developed a range of tips that will fit most commercially available in-ear headphones.

I've found that the Comply tips are the most reliably comfortable ear tips available, and they provide excellent isolation. But I've also found numerous complaints online about these tips changing the frequency response of the earphones. I thought it would be cool to look into the effects of ear tip selection on frequency response.

The Effects of Tip Selection on Frequency Response
I decided to try three different headphones: the Etymotic ER4P, which seats deeply within the ear; the Monster Turbine Pro Gold, which doesn't sit in the ear very well as it's heavy and rather large; and the Audeo PFE Gold, which is ergonomically excellent and seats at a moderate depth. All these headphones perform fairly well, and I felt they should be responsive enough to give me good data. I measured these IEMs with all the stock tips that fit my dummy head, and the recommended Comply tip for each headphone.

I should mention here that the dummy's ear canals, while acoustically very similar to human ear canals, are not physically like human ear canals. Human ear canals usually have a bend, and not perfectly round in cross section; the dummy ear canals are straight and perfectly circular in cross section.

Etymotic ER4PT
I think Etymotic has one of the better tip selections available, and I was able to use three different Etymotic tips. In the photo at the top of the page, the leftmost IEM is the ER4PT, and the tips used are below it: the silicon triple flange; the Glider, which is a dense memory foam; the less dense Etymotic memory foam tip, and the Comply tip.

Here are the Left and Right channel frequency response plots with all four tips:


ComplyTip_graph_EtyER4PLeft


ComplyTip_graph_EtyER4PRight

Here we can see in both the left and right ear measurements very little difference in response with the various tips. The notable exception is the triple flange tip which deviates in the very low bass, and at around 3-4kHz. The change in the bass response is similar to what is seen with the "main spring" effect on full size, sealed headphones. My guess is that the longer tube of the tri-flange type tip and its greater mass of elastic silicon create a mechanical resonance in the tip that causes the dip.

Monster Turbine Gold
Although these come with a wide variety of tips, I could only find two that would effectively seat in the ear canal of the dummy.


ComplyTip_graph_TurbineLeft


ComplyTip_graph_TurbineRight

Results of the left and right ear are a little mixed, but it's clear that the triple flange tip results are the most disparate. The Monster triple flange tip is somewhat larger and longer than the Etymotic triple flange, and has less support from the nozzle of the earphone than that of the Etymotic. The Comply tip does seem to slightly reduce the high frequencies above 10kHz, but I would say this is a relatively negligible amount. Certainly not large enough to account for some of the vehement complaints of loss of highs sometimes reported.

Audeo PFE Gold
The Audeo tip selection is small, and only one silicon tip fit the dummy.


ComplyTip_graph_AudeoLeft


ComplyTip_graph_AudeoRight

Here we can see the Comply tip had no effect on the right channel, and only a small effect on the left channel above 10kHz relative to the stock silicon round tip.

Measurement Results
It seems clear to me that the Comply tips are not affecting the sound substantially. In fact, it seem the triple flange tip types are more likely to cause changes in response.

So, the question remains: Why do people complain of Comply tips sounding muffled?

I think I have one possible answer ...



Properly Preparing of Comply Tips for Insertion
Comply tips have two parts: the outer foam; and a stiffer inner tube of plastic that slides over the nozzle of the earphone. The rounded end of the foam extends further than the inner tube. When squishing the foam between your fingers prior to insertion, if you simply roll the tip between your fingers the foam remains longer than the tube. I think this extra foam at the tip can push against the side of your ear canal at the bend and may partially or completely block the end of the tube from which sound emits. This will muffle the sound.

On the other hand, if you prepare the tip by pressing the foam rearward as you compress it, you can make the inner tube the most forward part as it is inserted, making it far less likely to close off as it hits the bend in your ear canal.


As an alternative, some people use a razor blade to cut off the end of the foam at the tip. Others will install the tip backwards as the foam and inner plastic of the tube are the same length at the back. These methods probably work fine, but I've simply not found the need if you prepare the tip as shown in the video.

Cleaning Comply Tips
Because of their tacky nature, Comply tips pick up dirt and ear wax rather easily. The best way to have clean tips is to clean you ears regularly, and have clean hands when preparing the tips for use. None the less, the tips will eventually get dirty.

The Comply tips are a very special material and can easily be damaged (disintegrated in some cases) if alcohol, mineral spirits, or other volatile chemicals are used for cleaning. Comply recommends that you simply dampen a cloth with warm water and wipe them down. Then leave the tip to dry overnight. If you soak the tips in water, some of the chemicals in the material will leach out and the tips may degrade more quickly.

Summary

I've found the Comply tips to have very little effect on the sound quality of my IEMs, which is born out in the measurements made. I've also found them to provide excellent isolation, though I didn't do measurements to confirm.

The comfort provided by Comply tips is simply extraordinary. In every case I've tried they are a significant improvement over the stock tips that come with the earphones. Additionally, the security of fit in my ears was much better than stock silicon tips.

Comply tips are about double the price of stock replacement tips, but the improved comfort and fit make them a no-brainer for me. Highly recommended!


More:https://www.innerfidelity.com/content/comply-foam-tips-and-effects-tip-selection